The optimized workstation 670 is equipped with bottom, needle and alternating foot top feed, switchable fullness chooseable from top or bottom and stitch loosening device.The post of the machine is located on the right side for easy handling when attaching the sleeve lining through the shoulder pad.
Bilder folgen
670 | Optimized workstation for attaching sleeve lining through the shoulder pad
Stitch loosening device for perfect shoulder pads
Your benefits at a glance
Secured sewing startFor a secured sewing start, a low thread tension and stitch condensing can be switched on.
Material thickness detection
Programmable, automatic material thickness detection will be connected via a sensor automatically.
Switchable functions
2nd thread tension, 2nd foot stroke and 2nd stitch length are switchable manually or automatically. A safe sewing start with low thread tension will be achieved by means of 2nd thread tension and in combination with stitch condensing.
Fullness value
Stitch loosening finger (long and short version) to adapt the thread quantity to the thickness of the shoulder padThe switchable stitch loosening device prevents squeezing when the shoulder pad is sewn through. Thus, the pad retains its volume and soft touch.
Oil- Lubrication
The central oil-lubrication is positioned with an eyeglass in thearm. Optionally it can be equippedwith a warning light as an oil deficien cy indicator 9850 867001.
Large three-piece vertical hook 26 mm with 60% higher bobbin thread capacity enables a reduced bobbin changeLarge three-piece vertical hook
Large, three-part vertical gripper Ø 26 mm has 60% higher bobbin capacity for reduced bobbin change. The optimized hook allows lowest thread tension.
Examples of use
Attach sleeve lining through the shoulder pad into the armhole
In doing so, the wearing comfort will be increased by full ness into the sleeve lining. In order to maintain the soft grip of the shoulder pad, the stitch loosening device provides for a loose stitch tension and the correct amount of thread during the stitch formation so that the shoulder pad is not compressed.
Performance examples in 480 min.:
160 – 200 Sleeve lining through the shoulder pad
Attaching sleeve heads / wadding stripes
If the sleeve head is sewn after attaching the sleeves, the practical post bed construction offers an optimal handling of the material.
Performance examples in 480 min.:
400 – 460 Pairs of sleeve heads / wadding stripes
Attach sleeve lining in the lower armhole area
Attach sleeve lining in the lower armhole area In this processing the sleeve lining is sewn only in the lowerpart of the armhole. The lining is basted in the region of the sleeve head by blind stitching afterwards. The standard swi veling edge guide is comfortably adjustable in height and seam width.
Technical specifications
info
Stitch length9
info
Stitches/min.1800*****
info
Sewing MaterialMS
Single needle
Lockstitch (301)
Vertical hook, large (L, Ø 26 mm)
Bottom feed, needle feed and alternating foot top feed
Fullness above, adjustable by hand
Fullness below, adjustable by hand
Thread trimmer
Control for 2 feed lengths
info
Seam backtacking A
Sewing foot lift, automatic
MTD - Automativ material thickness detection
Manual retrieval of stitch loo sening, second foot stroke, second stitch length
info
Clearance when Sewing/LiftingA= 10
/
B= 20
info
Additional thread tension,Ma
Program control, operating panel OP1000
Integrated LED sewing light with dimmer
Oil maintenance indicator
info
Air requirement per stroke / Air pressure0,64
/
6
info
Needle system190 R
info
Needle size90-160
info
Synthetic50/3 - 120/3
info
Dimensions (Length, Width, Height)1.350
/
780
/
1.350
info
Post bed machine with clearanceC= 335
/
D = 297
info
Clearance with slideable side tableD=225
DA-sewing drive
info
Nominal voltage1x230V, 50/60 Hz
info
Rated power375
info
Weight, sewing head70
info
Weight, complete130
Standard
Optional
Downloads
Operating Instructions
Parameter Lists
670 / DE
Parameter Lists / PDF 685 KB
670
Parameter Lists / PDF 1 MB
670 / CS
Parameter Lists / PDF 866 KB
670 / EN
Parameter Lists / PDF 663 KB
670 / FR
Parameter Lists / PDF 884 KB
670 / HU
Parameter Lists / PDF 844 KB
670 / PL
Parameter Lists / PDF 867 KB
670 / ES
Parameter Lists / PDF 923 KB
