The step motor-controlled clamp lift ensures shorter cycletimes and thus increased efficiency. Furthermore, the easy operation and the simple adaptation of the bartack patterns to individual requirements allow flexible and fast sewing in light to medium weight fabric.
513 | CNC-controlled automatic lockstitch bartacker
Ideal solution for bartacking operations
Your benefits at a glance
LCD Control panelConvenient for editing, saving and recalling bartack shapes
Symbols as well as the simple design make the control panel very user-friendly. The standard bartacks can be rapidly adapted to the different applications and stored, if required. Furthermore, modified standard bartack patterns and sequence programs can be assigned to the favourite buttons so that they are quickly retrievable.
Short thread trimmer with ≤ 3 mm
The short thread cutter as an essential functionality. With ≤ 3 mm on the underside of the bartack, additional trimming is unnecessary for most applications.
Conversion kit "Heavy" (optional)
Superior quality, excellent performance
The optionally available conversion kit “Heavy” allows bartacking operations also in medium to heavy-weight materials.
Clean clothes and clean environment
The fully sealed internal lubrication mechanism prevents pollution of the sewing material. This also reduces the noise level during operation. The targeted distribution of the lubricants extends the service life and helps to save resources.
"Pattern Design Software" (optional)Pattern Design Software (optional)
The optionla "Pattern Design Software" (parts-no. 0513 590024) enables easy and fast creation of individual tack patterns on the PC. The tack patterns can be easily transferred to the 513 control unit via an USB flash drive.
Contraction clamp (optional)
Optional contraction clamp for buttonhole bartacks (part no. 513 590014)
The automatic bartacker can optionally be equipped with a contraction clamp for bartacking buttonholes. When the clamp is lowered, the arms of clamp presses the buttonhole together. The buttonhole is thus perfectly closed after bartacking.
The automatic bartacker 513 is equipped as standard with the clamping foot set no. 2, which is ideally suited for cross tacking in standard material. The clamping foot set no. 18 (part no. 0512 220184) for double D-tacking in piping pockets is optionally available
Short cycle time for higher efficiency due to stepper motor-controlled clamp release
Examples of use
Pocket openings
Clamp foot set no. 18 (part no. 0512 220184) for double D-tack on piped pockets is available as an option.
Pocket flaps
Pocket flaps The optional "Pattern Design Software" (part no. 0513 590024) allows easy and quick creation of individual tack patterns on the PC. The tack patterns can easily be transferred to the control unit of the 513 via USB stick.
Belt loops
The clamping foot set no. 20 (option, part no. 0512 220204) is predestined for tacking belt loops.The clamping foot set no. 2 (part no. 0512 220024) is suitable for standard crossbars and can be used for bar sizes up to max. 20.0 mm x 4.5 mm - for a wide range of applications.
Buttonhole tack
Buttonhole bartack Optional contraction clamp for buttonhole bartack (part-no. 513 590014): The automatic bartacker can be optionally equipped with a contraction clamp for bartacking buttonholes. When lowering the clamp, the clamp pairs press the buttonhole beads together. The buttonhole is thus perfectly closed after bartacking.
Technical specifications
info
Stitch length0,1-10
info
Stitches/min.3.200*
info
Sewing MaterialLM or MS
info
Sewing field size40x30
Single needle
Lockstitch (301)
Horizontal hook, small (S, Ø 22mm)
CB Hook
Clamp- or rail top feed
info
Short thread trimmer 3mm
Piece counter/ Bobbin capacity counter
Thread wiper
info
Clearance when lifting17
info
Standard seam pattern100
info
Memory capacity (stitches)16.000
info
Storage locations for modified seams100
info
Number of sequences25
info
Seam patterns per sequence30
CNC contour control with program control
info
Needle system134
info
Needle size80-110
info
Synthetic50/3 - 150/3
info
Cylinder arm machine with clearanceC=180
/
D=85
info
Nominal voltage1x230V, 50/60 Hz
info
Rated power500
info
Weight, sewing head58
info
Packaging size (Length, Width, Heigh)870
/
430
/
890
Standard
Optional
