Are you looking for a comfortable solution for your jacket pocket production? The most comfortable solution is the 756 F. With its automatic feeding, pattern matching and cutting device, it fulfills the desire for perfect quality in use for outside and inside pockets. Whether in patterned or unpatterned fabric, the sewing unit achieves in the simplest way a pattern matching at the highest level. The need to mark the pocket position is eliminated by the matching device, thus reducing the cycle time of the operation.
756 F | Sewing unit for runstitching straight and slanted pocket openings with fully automatic feeding device and pattern matching
Up to 20% time safe
Your benefits at a glance
Fully automatic feeding methodsFully automatic feeding methods
With these feeding methods, the piping strips, flaps and pocket bags are fed fully automatically. This method allows a fully over lapped operation when loading the sewing unit. While the sewing unit sews the pocket, the piping ends can already be cut and the pocket components of the following pocket can be loaded and positioned exactly.
Fully automatic piping end cuttingQuality improvement and increase in productivity due to the fully automatic piping end cutting
Pattern matchingSaving of markings for checked and striped fabrics
Save marking your pocket openings with the fully automatic feeding and matching device. The matching device allows the flaps on the front part to be matched directly in accordance with the pattern, without additional marking of the flap position.
Adjustable flap guide
To counteract the inaccuracy when using flaps with the help of laser marking lights, the 756 F offers a mechanically adjustable flap guide.This allows the constant flap width to be adjusted and pocket quality to be ensured. The flap guide, which is mechanically adjustable via a knurled nut, allows perfect flap width when matching to pattern material.
Unique programmable material adjustment
For easy setting of different material thicknesses by the operator – pocket materials of different thickness can be processed one after the other without mechanical adjustments. The programming for the height of the folding guide plates and the folder height, allow a perfect adaptation to different material thicknesses with only one touch.
Enlarged material passage
The perfected folder system with improved material passage enables the simple and quick exchange of folder and sole inserts in a few minutes.
Programmable flap pattern correction
The programmable flap pattern correction in cross direction, increases the flexibility in the use of different fabric thickness with pattern matching. Mechanical adjustment to different materials is therefore no longer necessary and can be programmed by the operator.
Examples of use
Performance in 480 min.
Slanted Single-/double piped pockets with flaps in jackets (patterned).
Additional parts: Flap, piping strip, pocket bag (attached); approx. 1,000 – 1,200 pockets.
Slanted single-/double piped pockets with flaps in jackets (unicoloured).
Additional parts: Flap, piping strip, pocket bag (positioned underneath or attached); approx. 1,600 – 2,000 pockets in 480.
Single-/double piped pockets in lining.
Additional parts: piping strip, 2 pocket bags, lining flap triangle; approx. 1,400 – 1,600 / 480.
Technical specifications
info
Stitch length0,5-4,5
info
Stitch length3.000
info
Sewing MaterialLM / M / MS
info
Seam length20*
info
Twin needle10*
info
Twin needle, disengageableLockstitch (301)
Vertical hook, large (L, Ø 26 mm)
Programmable needle transport
Clamp adjustment with material spreading
Thread trimmer, automatic
info
Automatic corner knife station for straight or slanted pocketsinfo
Multi function corner knife station for straight or slanted pocketsCentre knife with counter knife, separately motor driven
Notching of piping ends
Automatic feeding of piping strips
Automatic feeding of flaps and additional parts
Automatic matching device
info
Stitch condensing, automaticNeedle thread monitor
Bobbin thread monitor
Bobbin thread control
Suction device for the exact positioning of the fabric
Flip stacker
Bundle clamp with rest table
Program control, operating panel OP7000 with graphic display and touch screen
info
Air requirement per stroke / Air pressure6
/
6
info
Needle system134-35/DPX and others
info
Needle size80-110
info
Nominal voltage1x230V, 50/60 Hz
info
Rated power500
info
Weight, sewing head220
info
Weight, complete320
info
Packaging size (Length, Width, Heigh)1.830
/
1.230
/
1.590
Standard
Optional
