The optimized workstation 680 is equipped with an edge trimmer, bottom, needle and alternating foot top feed, switchable fullness chooseable from top or bottom and stitch loosening device. The post of the machine is located on the left side for easy handling when basting the body lining into the arm hole with simultaneous trimming of the shoulder pad.
680 | Optimized workstation for attaching shoulder pad and body lining
Stitch loosening device for perfect shoulder pads
Your benefits at a glance
Secured sewing startFor a secured sewing start, a low thread tension and stitch condensing can be switched on.
Material thickness detection
The automatic material thickness detection scans the material thickness via a sensor and is switched on automatically. It can be programmed for symmetrical and asymmetrical shoulder pads with 2 different values within one seam. Depending on the programmed value, it automatically switches on the machine's additional functions - stitch loosening function, second stitch length, second foot stroke height and second thread tension. This guarantees a consistent volume and soft feel of the shoulder pad.
Stitch loosening finger long and short version to adapt the thread quantity to the thickness of the shoulder padThe switchable stitch loosening device prevents squeezing when the shoulder pad is sewn through. Thus, the pad retains its volume and soft touch.
Switchable functions
2. stroke height of the alternating foot top feed for easier sewing over the shoulder pad
2. stitch length for sewing over the shoulder pad
2. thread tension for a loose thread tension in the shoulder pad
Fullness value
Switchable fullness either in the upper or lower fabric layer at the touch of a button.
The fullness value is mechanically adjustable and – depending on the application – it can be switched on in the upper or lower fabric by push button.
Edge trimmer for perfectly trimmed excess lengths of lining and shoulder pads
Pneumatic edge trimmer
The pneumatic edge trimmer of the 680 can be easily switched on and off via a function key. Cutting widths of 6.4 mm, 8 mm and 10 mm can be realized in combination with stitch lengths of 6 or 9 mm.
Oil- Lubrication
The central oil-lubrication is positioned with an eyeglass in the arm. Optionally it can be equipped with a warning light as an oil deficiency indicator (9850 867001).
Large three-piece vertical hook 26 mm with 60% higher bobbin thread capacity
Large three-piece vertical hook
Large, three-part vertical hook (Ø 26 mm) has 60% higher bobbin capacity for reduced bobbin change. The optimized hook allows lowest thread tension.
6-function key bar with quick access and favorite key for the functions: fullness on top, fullness on bottom, 2nd foot stroke, 2nd stitch length, automatic material thickness detection, edge trimmer ON/OFF (only on 680)
Examples of use
Attach shoulder pad and body lining and simultaneosly cutting the fabric edges
The edge cutter cuts the body lining as well as the shoulder pad at the same time while attaching the body lining. Sewing equipment's with cutting widths of 6.4 mm, 8 mm and 10 mm are optionally available in combination with stitch lengths of 6 or 9 mm. Fullness will be distributed from below in the body lining.
Performance examples in 480 min.:
280 – 340 Body linings
Attaching sleeve heads / wadding stripes
If the sleeve head is sewn after attaching the sleeves, the practical post bed construction offers an easy handling of the material.
Performance examples in 480 min.:
400 – 460 Pairs of sleeve heads / wadding stripes
Attach shoulder pads
If the shoulder pad is sewn, the stitch loosening device provides a soft, voluminous shoulder pad.
Baste ironed shoulder pads
With a max. stitch length of 9 mm, the shoulder pads are basted into the armhole. Thus the volume of the shoulder pad remains unaffected.
Performance examples in 480 min.:
230 – 275 Pairs of ironed shoulder pads
Technical specifications
info
Stitch length9
info
Stitches/min.1.800*
info
Sewing MaterialMS
Single needle
Lockstitch (301)
Vertical hook, large (L, Ø 26 mm)
Vertical hook, extra large (XXL, Ø 32 mm)
Bottom feed, needle feed and alternating foot top feed
Fullness above, adjustable by hand
Fullness below, adjustable by hand
Thread trimmer
info
Edge trimmer,6,4
/
8,0
/
10,0
info
Knife stroke, standard10
info
Knife stroke, adjustable up to20
Control for 2 feed lengths
info
Seam backtacking A
Sewing foot lift, automatic
MTD - Automativ material thickness detection
Manual retrieval of stitch loo sening, second foot stroke, second stitch length
info
Clearance when Sewing/LiftingA= 10
/
B= 20
info
Additional thread tension,Ma
Program control, operating panel OP1000
Integrated LED sewing light with dimmer
Oil maintenance indicator
info
Air requirement per stroke / Air pressure0,69
/
6
info
Needle system190 R
info
Needle size90-160
info
Synthetic50/3 - 120/3
info
Dimensions (Length, Width, Height)1.350
/
780
/
1.350
info
Post bed machine with clearanceC= 335
/
D = 297
DA-sewing drive
info
Nominal voltage1x230V, 50/60 Hz
info
Rated power375
info
Weight, complete130
Standard
Optional
Downloads
Parameter Lists
680 / DE
Parameter Lists / PDF 665 KB
680 / CN
Parameter Lists / PDF 1 MB
680 / CS
Parameter Lists / PDF 902 KB
680 / EN
Parameter Lists / PDF 644 KB
680 / FR
Parameter Lists / PDF 884 KB
680 / HU
Parameter Lists / PDF 844 KB
680 / PL
Parameter Lists / PDF 867 KB
680 / ES
Parameter Lists / PDF 923 KB
