The existing programs are scalable and can be saved in this modified form. The simple operation and easy adaptation of the sewing patterns to a wide variety of buttons allow flexible and fast working.
533 | CNC-controlled lockstitch button sewer with stepper motor technology
Optimum solution for button sewing in light to medium weight material
Your benefits at a glance
Standard equipmentStandard equipment
The standard equipment includes an integrated positioning drive, the control panel, the electronically controlled clamp lifting and the short thread trimmer (~ 3 mm).
Short thread trimmer with ≤ 3 mm
The short thread trimmer enables a remaining thread length of only ~ 3 mm. This ensures that no separate trimming operation is required.
533 – Control panel
533 – Control panel:
A total of 50 pre-programmed standard button patterns are available. The standard patterns can be temporarily modified in length, width and speed. The button patterns can be called up in 25 sequences with up to 30 button patterns per sequence. A maximum of 16,000 stitches can be stored.
Pattern Design Software
The optional “Pattern Design Software” (0513 590024) enables easy and fast creation of individual button patterns on the PC. The tack patterns can be easily transfered to the 533 control unit via an USB flash drive.
Examples of use
“Large button” conversion kit (0532 590054):
Button clamp set no. 3 can be converted with the help of the optional conversion kit "Large button" in such a way that the attaching of buttons with a diameter of 11 to 40 mm and a button height of 5.5 mm is no problem. For this purpose, the clamping feet are changed and a longer shank builder up to 10 mm shank length is attached.
533 – Button clamp
The button clamp holds the buttons securely and allows a quick change between different buttons for a wide range of applications. The clamp lifting is done via a stepper motor.
Standard button clamp
The lockstitch button sewer 533 is equipped with button clamp set no. 5 as standard. The button clamp is ideally suited for buttons with a button diameter of 8 to 24 mm and a button height of up to 3.2 mm.
Button clamp set no. 3 with shank builder (0532 220034)
The optional button clamp set No. 3 offers the possibility to sew on buttons with a shank height of up to 5 mm. This clamp set is suitable for button diameters from 7 to 18 mm and a button height of up to 3.2 mm
Technical specifications
info
Stitch length0,1-10
info
Stitches/min.2.700
info
Sewing MaterialL / M
info
Button diameter8-40 *
info
Sewing field size10x10
Single needle
Lockstitch (301)
CB Hook
Thread trimmer, automatic
info
Short thread trimmer3
Piece counter/ Bobbin capacity counter
Thread wiper
info
Standard seam pattern50
info
Memory capacity (stitches)16.000
info
Storage locations for modified seams100
info
Number of sequences25
info
Seam patterns per sequence30
info
Needle system135-17 / DPx17
info
Needle size80 - 110
info
Synthetic50/3 - 150/3
info
Nominal voltage1x230V, 50/60 Hz
info
Power consumption1
info
Weight, sewing head58
info
Weight, complete96
info
Packaging size (Length, Width, Heigh)870
/
430
/
680
Standard
Optional
